Multi-Zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions

Multi-Zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions

Journal & Paper No:

SAE Paper 2001-01-1246

Authors:

Dohoy Jung and Dennis N. Assanis

Abstract:

A quasi-dimensional, multi-zone, direct injection (DI) diesel combustion model has been developed and implemented in a full cycle simulation of a turbocharged engine. The combustion model accounts for transient fuel spray evolution, fuel-air mixing, ignition, combustion and NO and soot pollutant formation. In the model, the fuel spray is divided into a number of zones, which are treated as open systems. While mass and energy equations are solved for each zone, a simplified momentum conservation equation is used to calculate the amount of air entrained into each zone. Details of the DI spray, combustion model and its implementation into the cycle simulation of Assanis and Heywood [1] are described in this paper. The model is validated with experimental data obtained in a constant volume chamber and engines. First, predictions of spray penetration and spray angle are validated against measurements in a pressurized constant volume chamber. Subsequently, predictions of heat release rate, as well as NO and soot emissions are compared with experimental data obtained from representative heavy-duty, turbocharged diesel engines. It is demonstrated that the model can predict the rate of heat release and engine performance with high fidelity. However, additional effort is required to enhance the fidelity of NO and soot predictions across a wide range of operating conditions.

Paper: P2001_01.PDF