Program
- A clickable program at-a-glance is shown below, and a detailed program in PDF is here
- Each paper is allocated a 20 min. slot. Please limit your presentations to 15 minutes to allow sufficient time for questions and laptop turnover.
- Each room is equipped with an LCD projector. It is expected that presenters will bring their own laptop computers.
- If you have other audio-visual needs, please contact the symposium secretariat.
Sunday, July 22
5:00 pm – 7:00 pm |
Registration and Welcome Reception (Assembly Hall) |
Monday, July 23
8:00 am – 3:00 pm |
Registration (Assembly Hall) |
|
8:20 am – 8:50 am |
Continental Breakfast (Assembly Hall) |
|
8:45 am – 9:00 am |
Opening Remarks (Amphitheatre) |
|
9:00 am – 10:00 am |
Keynote Talk: Professor Francesco Jovane, High Value K-based Manufacturing: addressing the new Industrial Revolution challenge (Amphitheatre) |
|
10:00am – 10:30am |
Coffee Break (Assembly Hall) |
|
10:30am - 11:50am |
Session MoA1: Fixturing, grasping, and manipulation (East Conference Room) |
Session MoA2: Control of Manufacturing Processes and Systems (West Conference Room) |
11:50 pm – 1:30 pm |
Lunch (on your own) |
|
1:30 pm – 2:50 pm |
Session MoB1: Assembly and Disassembly Planning (East Conference Room) |
Session MoB2: Modeling and Optimization of Manufacturing Systems (West Conference Room) |
2:50 pm – 3:20 pm |
Coffee Break (Assembly Hall) |
|
3:20 pm – 5:00 pm |
Session MoC1: CAD/CAM and Manufacturing Processes (East Conference Room) |
Session MoC2: Automated, Robotic, and Virtual Assembly (West Conference Room) |
5:30 pm – 6:30 pm |
ISAM Organizing Committee Meeting (West Conference Room: everyone invited) |
|
Tuesday, July 24
8:00 am – 3:00 pm |
Registration (Assembly Hall) |
|
8:20 am – 8:50 am |
Continental Breakfast (Assembly Hall) |
|
8:50 am – 9:00 am |
Announcements (Amphitheatre) |
|
9:00 am – 10:00 am |
Keynote Talk: Professor Vijay Kumar, Modeling, analysis and design of dynamical systems with multiple frictional contacts (Amphitheatre) |
|
10:00am – 10:30am |
Coffee Break (Assembly Hall) |
|
10:30am - 11:50am |
Session TuA1: Micro Assembly Systems (East Conference Room) |
Session TuA2: Motion and contact analysis and planning (West Conference Room) |
11:50 am – 1:30 pm |
Lunch (on your own) |
|
1:30 pm – 2:50 pm |
Session TuB1: Micro Assembly Processes (East Conference Room) |
Session TuB2: Planning and Scheduling of Manufacturing Systems (West Conference Room) |
2:50 pm – 3:20 pm |
Coffee Break (Assembly Hall) |
|
3:20 pm – 4:40 pm |
Session TuC1: Self- and Micro Assembly (East Conference Room) |
Session TuC2: Evolvable Assembly (West Conference Room) |
4:45 pm – 5:00 pm |
Closing Remarks (Amphitheatre) |
|
7:30 pm – 10:30 pm |
Symposium Banquet (Michigan Room, Michigan League 2F) |
|
Wednesday, July 25
9:00 am – 1:00 pm |
Ford Rouge Factory Tour (meet in front of Rackham Building) |
1:00 pm – 2:30 pm |
Lunch (on your own) |
2:30 pm – 5:30 pm |
University of Michigan Laboratory Tour (meet in front of Rackham Building) |